Using pure gas in your vehicle can give you better mileage than ethanol-containing gasoline. Basically, ethanol is mixed with gasoline to decrease carbon emissions.
Yet it reduces pollution but also hampers the engine. That is why many people curious to know how to neutralize ethanol in gasoline.
Here I will share a step-by-step guide to neutralize ethanol in gasoline to extend engine life and boost up mileage.
How To Neutralize Ethanol In Gasoline?
In the market, it is not possible to always find out ethanol-free gases. So you need to learn how to neutralize ethanol to avoid engine wear and tear.
There are so many methods to neutralize ethanol in gasoline. You can apply fuel treatment such as stabilizers, lubricants, or cleaner to neutralize the bad effects of Ethanol. It will work as a prevention barrier of ethanol damages.
You can mix water with gasoline. Then shake the jar crucially to mix water with ethanol.
It will detach ethanol from gasoline and create two different layers. So you will easily take out the ethanol/water layer from gasoline.
Instead of fuel treatment, you can also mix water with gasoline. Then shake the jar crucially to mix water with ethanol.
It will detach ethanol from gasoline and create two different layers. So you will easily take out the ethanol/water layer from gasoline.
Well, it is brief about neutralizing ethanol in gasoline. But you need to maintain a proper strategy to get the best result. Let’s know the details process with tips and tricks.
Read More: What Causes Engine Backfire When Starting?
Best Fuel Treatment For Neutralizing Ethanol
You can do fuel treatment with different ingredients such as lubricants, cleaners, or stabilizers. Among them, the most effective option is applying stabilizers ethanol treatment.
You can simply mix Stabil into your vehicle’s fuel tank to avoid engine damages due to ethanol. It produces a corrosion preventative vapor in your fuel tank to prevent any engine damage.
You can apply this treatment in different brand ethanol blends such as E10 to E85. This stabil ethanol treatment will give you the below benefits.
- Clean the fuel tank to improve the vehicle performance
- Boost up engine power and fuel efficiency
- If you store the fuel for a long period, it helps to stabilize fuel
- Detach water from the fuel to obstruct phase separation
- Stop corrosion above or below the fuel line to protect engine life
Separating Ethanol From Gasoline
You can also directly remove the ethanol from gasoline to avoid the damages of ethanol.
Follow the below step to discard ethanol effectively without reducing gasoline performance.
Take Preparation
Before starting the process, first, arrange the below tools:
- Gloves
- Empty gasoline container
- Measurement cup
- Ethanator
Mix Water
Now you should wear safety gloves to mix water with gasoline. Keep the gasoline container on flat surfaces and pour 1 cup of water per gallon gasoline.
Never overfill the gasoline more than 95% as it requires extra space to expand after mixing water.
You can also mix a few drops of food color with the water to easily identify the ethanol layer.
Read More: What Causes A Car To Backfire On Acceleration?
Shaking The Jar
You must check whether you store gasoline in a container that has a tight seal or lid for closing.
After mixing water, close the lid of the bottle or container and start shaking for 15-30 seconds to mix the water perfectly. Don’t do this task near the flame to avoid injury.
Remove Gasoline
After the mixture is settled, you will find two different layers in the container.
The coloring layer contains ethanol and water. So you can understand that another layer is gasoline.
So you need to take out the gasoline layer into another fuel safe container. Place the container on the tip of another empty container to pour the gasoline layer carefully.
But it has a risk of spilling gasoline that can waste your fuel. So it is better to use Ethanator.
Read More: What Causes An Engine To Backfire Through The Exhaust?
Separate Gasoline Using Ethanator
After shaking the mixture, you can directly pour the gasoline mixture into the Ethanator to settle it properly.
You need to wait for 3-4 hours for the water to settle. After the water settled out, you can clearly see two different layers into the ethanator.
The water and ethanol layer will remain on the bottom position so you can drain off the water and Ethanol layer through the bottom valve into an empty container.
The Gasoline layer will stay on the top position in Ethanator.
Cons Of Ethanol In Gasoline
Ethanol is more costly than gasoline to use in the automotive industry. Because you require more ethanol to ride than gasoline.
You can cover the same distance with lower gasoline than ethanol.
Besides, ethanol is also unstable and causes harm to the internal part of the engine of your cars. You can face the below issues with Ethanol in gasoline.
- It can overheat the engine and high risk of burning small engines
- Due to alcohol properties, it turns the rubber material dry in the fuel system that cracks the delivery
- It causes corrosion, stalling, and other engine damages
- Build deposits and other particles in fuel tanks and engines. That can block the filters or fuel injectors. As a result, you can get stuck in a middle ride.
So you can understand ethanol has a lot of risk factors to use in the automotive sector.
There is no doubt that it is good for reducing pollution, but it brings dangers for your cars.
So the best solution is to neutralize ethanol in gasoline to avoid the problems and boost up performance.
Final Thought
Ethanol-free gasoline is not easy to find on most gas stations. To overcome the ethanol problem, you must learn how to neutralize ethanol in gasoline.
We try to share two effective methods to fully neutralize ethanol in gasoline.
Follow our tricks and tips to neutralize ethanol and protect your car’s engine. This simple step will protect you from ruining expensive vehicles.
So you should ensure the best fuel treatment to boost up speed and solve so many issues conveniently.
