Are you struggling with the aftermath of using Blue Devil Head Gasket Sealer on your vehicle?
While this product claims to fix head gasket leaks, it often causes more harm than good.
Removing Blue Devil can be a daunting task, but fear not!
In this blog post, we will guide you through the process of safely and effectively removing Blue Devil Head Gasket Sealer from your engine, so you can get back on the road without any worries.
How To Remove Blue Devil Head Gasket Sealer?
Here’s a step-by-step guide on how to remove Blue Devil Head Gasket Sealer from your engine.
Step 1: Gather the Necessary Supplies
To remove Blue Devil Head Gasket Sealer, first ensure you have the right tools and materials.
You’ll need a socket wrench, a drain pan, a funnel, a can of carburetor cleaner, a towel, and a container for the used coolant.
Gather these items before starting the process to make it smoother and more efficient.
Step 2: Drain the Cooling System
Before you start, locate the vehicle’s drain plug, typically found at the bottom of the radiator.
Place the drain pan under the plug and use the socket wrench to loosen it. Carefully remove the plug and let the coolant drain into the pan.
Make sure you dispose of the used coolant properly, as it can be harmful to the environment.
Step 3: Flush the Cooling System
Once you’ve drained the coolant, you’ll need to flush the cooling system to remove the Blue Devil Head Gasket Sealer.
Fill the radiator with water and add a flushing agent according to the manufacturer’s instructions.
Start your engine and let it run for the recommended amount of time, then turn off the engine and allow it to cool.
Once cooled, drain the system again using the same method as before.
Step 4: Spray Carburetor Cleaner
To help break down any remaining sealer residue, use a can of carburetor cleaner.
Spray it into the radiator, focusing on areas where the sealer may have accumulated. Allow the cleaner to sit for a few minutes to dissolve the residue.
Step 5: Rinse the Cooling System
After using the carburetor cleaner, rinse the cooling system once more by filling it with water.
Start your engine and let it run for a few minutes to circulate the water. Turn off the engine, let it cool, and drain the water from the system.
Step 6: Refill with Fresh Coolant
Now that you’ve successfully removed the Blue Devil Head Gasket Sealer, it’s time to refill the cooling system with fresh coolant.
Use a funnel to pour the new coolant into the radiator, ensuring you fill it to the recommended level.
Replace the radiator cap and start the engine, allowing it to run for a few minutes to circulate the coolant.
Step 7: Check for Leaks and Monitor the Temperature
Lastly, inspect your vehicle for any leaks and monitor the temperature gauge while driving.
If you notice any issues, it may be necessary to revisit the steps or consult a professional mechanic for further assistance.
What chemicals can be used to remove Blue Devil Head Gasket Sealer?
Here are some chemicals that you can use to remove Blue Devil Head Gasket Sealer:
Digester Chemicals:
Digester chemicals are a type of cleaner that can be combined with a non-marring plastic scraper to remove the Blue Devil Head Gasket Sealer.
These chemicals are often used in industrial settings to clean machinery and other equipment.
It’s important to note that metal scrapers should be avoided as they can cause damage to the surface being scraped.
So, if you’re going to use digester chemicals, make sure you have the right tools and follow proper safety procedures.
Muriatic Acid (Hydrochloric Acid):
Muriatic acid, also known as hydrochloric acid, is a strong acid that can dissolve many metals and other materials.
It’s a highly corrosive substance and should only be used as a last resort.
If you’re going to use muriatic acid to remove the Blue Devil sealer, make sure you’re taking all necessary safety precautions.
Wear gloves and goggles, work in a well-ventilated area, and follow the manufacturer’s instructions carefully.
Acetone:
Acetone is a common solvent that can dissolve many organic compounds, including Blue Devil Head Gasket Sealer.
However, it’s important to note that acetone may also damage some types of plastics and other materials.
It’s also a good idea to test a small area first to make sure the acetone won’t damage the surface you’re working on.
Brake Cleaner:
A brake cleaner is a solvent that is commonly used to clean brake components. It can also be used to dissolve Blue Devil Head Gasket Sealer.
However, it’s important to note that brake cleaners may damage some types of rubber components in the cooling system.
If you’re going to use brake cleaner to remove the sealer, ensure you’re taking all necessary precautions to protect any rubber components that may be affected.
Tips for Avoiding Mistakes When Removing Blue Devil Head Gasket Sealer
Here are some essential tips for avoiding mistakes when removing Blue Devil Head Gasket Sealer.
Read the instructions
The first step to removing Blue Devil Head Gasket Sealer is to read the instructions.
It is essential to follow the instructions to avoid making mistakes that can damage your engine.
Failure to follow the instructions can lead to severe engine damage, which can be costly to repair.
Use the right tools
To remove Blue Devil Head Gasket Sealer, you need to use the right tools.
The manufacturer recommends using a scraper or sandpaper to remove the sealer.
Using the wrong tools can damage your engine and make it difficult to remove the sealer.
It is also essential to wear protective gloves to avoid skin irritation.
Use the right amount of force
When removing Blue Devil Head Gasket Sealer, it is essential to use the right amount of force.
Applying too much force can damage your engine while applying too little force can make it difficult to remove the sealer.
You should apply gentle pressure and avoid using excessive force.
Be patient
Removing Blue Devil Head Gasket Sealer requires patience. Rushing the process can lead to damage to your engine and make it difficult to remove the sealer.
You should take breaks and come back to the process when you feel refreshed.
Use a solvent
Using a solvent can make it easier to remove Blue Devil Head Gasket Sealer. The manufacturer recommends using acetone or brake cleaner to dissolve the sealer.
You should apply the solvent to the sealer and wait a few minutes before attempting to remove it. Using a solvent can make the process quicker and more efficient.
Clean the surface
After removing Blue Devil Head Gasket Sealer, it is essential to clean the surface thoroughly.
Any remaining sealer can cause problems later on, and it is essential to remove it completely.
You can use a degreaser or solvent to clean the surface, followed by a cloth to wipe away any remaining residue.
Check for damage
After removing Blue Devil Head Gasket Sealer, you should check for any damage to your engine.
Inspect the gasket and the surrounding area for any signs of damage.
If you notice any damage, you should take your car to a professional mechanic to have it repaired. Failure to repair the damage can lead to severe engine problems.
How much does it cost to remove Blue Devil Head Gasket Sealer?
The cost to remove Blue Devil Head Gasket Sealer varies depending on the type of vehicle and the extent of the damage caused by the sealer.
Although Blue Devil is marketed as a quick solution to fix head gasket leaks, it can cause more significant issues in the long run, especially if not used correctly.
Removing Blue Devil Head Gasket Sealer can cost between $500 and $1,500, depending on the severity of the damage to the engine, the type of vehicle, and the labor costs.
A mechanic may need to disassemble the engine to clean out the sealer, which adds to the overall expense.
To avoid the cost of removing the Blue Devil Head Gasket Sealer, it is best to have any head gasket issues diagnosed and fixed appropriately by a trained professional.
Regular car maintenance and inspections can also prevent head gasket problems from occurring.
How to dispose of Blue Devil Head Gasket Sealer safely
Here are some tips on how to dispose of the Blue Devil Head Gasket Sealer safely.
Follow the manufacturer’s instructions
Before disposing of any chemical product, it is important to read and follow the manufacturer’s instructions.
Blue Devil Head Gasket Sealer comes with detailed instructions on how to use and dispose of the product.
Use a certified hazardous waste facility
One of the safest ways to dispose of Blue Devil Head Gasket Sealer is to take it to a certified hazardous waste facility.
These facilities are specially equipped to handle hazardous waste and will ensure that the product is disposed of safely and legally.
Do not pour it down the drain
Never pour Blue Devil Head Gasket Sealer down the drain or into a sewer system. This can contaminate the water supply and cause harm to the environment.
Additionally, it may be illegal to dispose of hazardous waste in this manner which can result in fines or legal action.
Seal the container
When transporting Blue Devil Head Gasket Sealer to a hazardous waste facility, it is important to seal the container tightly.
This will prevent any leaks or spills during transport and ensure that the product is contained.
Store it safely
If you are unable to dispose of Blue Devil Head Gasket Sealer immediately, it is important to store it safely.
Be sure to label the container with the contents and the date it was purchased.
Frequently Asked Questions
How Can I Remove Blue Devil Head Gasket Sealer From My Engine Block?
To remove Blue Devil Head Gasket Sealer from your engine block, you will need to use a degreaser or engine cleaner.
Apply the cleaner to the affected area and allow it to sit for a few minutes.
use a brush or cloth to scrub the area and rinse it thoroughly with water.
Can I Use A Power Washer To Remove Blue Devil Head Gasket Sealer?
Using a power washer to remove Blue Devil Head Gasket Sealer is not recommended.
The high-pressure water can force the sealer into the engine block, causing further damage.
It is best to use a degreaser or engine cleaner.
How Can I Remove Blue Devil Head Gasket Sealer From My Cooling System?
To remove Blue Devil Head Gasket Sealer from your cooling system, you will need to flush the system with water.
First, drain the old coolant and dispose of it properly. Fill the system with water and run the engine for a few minutes.
Drain the water and repeat the process until the water runs clear.
Can I Use A Chemical Cleaner To Remove Blue Devil Head Gasket Sealer?
Using a chemical cleaner to remove Blue Devil Head Gasket Sealer is not recommended.
Chemical cleaners can be harsh and may damage your engine block or cooling system.
Stick to using a degreaser or engine cleaner.
Will Blue Devil Head Gasket Sealer Dissolve Over Time?
Blue Devil Head Gasket Sealer will not dissolve over time.
It is designed to form a permanent seal on the damaged gasket.
Can I Use A Heat Gun To Remove Blue Devil Head Gasket Sealer?
Using a heat gun to remove Blue Devil Head Gasket Sealer is not recommended.
The heat can cause the sealer to harden and make it more difficult to remove. It is best to use a degreaser or engine cleaner.
Conclusion:
Blue Devil Head Gasket Sealer may seem like a quick and easy fix for a blown head gasket, but it’s important to remember that it may not always work.
By following the steps outlined in this blog post, you can safely and effectively remove Blue Devil Head Gasket Sealer from your engine and move on to other repair options.
